Standards

AIIM's Standards Program develops and promotes high quality standards, recommended practices, technical reports, and industry specifications to support interoperability, interchangeability, and the global enterprise for information professionals

21 - 30 Results out of 68

AIIM MS17-1992, Micrographics - Rotary (Flow) Microfilm Camera Test Chart and Test Target - Descriptions and Use

This standard describes specifications for creating and using a test chart and a test target for rotary (flow) microfilm cameras and a method for evaluating the photographic quality and mechanical performance of rotary microfilm cameras.

AIIM MS15-1999, Dimensions and Operational Constraints for Single-core Cartridge for 16 mm Processed Microfilm

This standard specifies the physical and performance characteristics of cartridges used for storing and viewing processed 16 mm microfilm. The intent of the standard is to achieve compatibility between the cartridge and automatic threading readers and reader-printers.

AIIM MS29-1992, Micrographics - Cores and Spools for Microfilm Recording Equipment - Dimensions

This standard covers the common (16mm, 35mm and 105mm widths) cores and spools currently in sue by the microfilm industry in original recording equipment.

AIIM MS35-1990, Recommended Practice for the Requirements and Characteristics of Original Documents That May Be Microfilmed

This standard recommended practice describes the essential requirements and characteristics for the creation of documents that will facilitate microfilming.

AIIM MS28-1996, Alphanumeric COM Quality test Slide

This standard describes the requirements for preparing a form slide for testing COM recorder output.


AIIM MS38-1995, Standard Recommended for the Microrecording of Engineering Graphics - Computer-Output Microfilm

This document specifies the procedures, dimensions, and quality values governing the micro-recording of engineering documentation with a 35mm Computer-Output Microfilmer (COM).

AIIM MS36-1990, Reader-Printers for Transparent Microforms - Performance Characteristics

This standard specifies the essential performance characteristics of reader-printers designed to view and make hard copies from roll microfilms and microfilm strips that have a maximum width of 35mm, microfiche, jackets, and image cards with a magnification no greater than 50:1.

AIIM MS4-1987, Flowchart Symbols and Their Use in Micrographics

Flowchart symbols, terminology and procedures were designed for use and compatibility with existing ANSI standards for flowchart information processing. These standards are defined in ANSI X.3.5-1970.


AIIM MS41-1996, Dimensions of Unitized Microfilm Carriers and Apertures (Aperture, Camera, Copy and Image Cards)

This standard specifies the dimensions and location of the aperture and carrier for aperture, camera, copy and image cards.

AIIM MS48-1990, Recommended Practice for Microfilming Public Records on Silver Halide Film

This practice covers original first-generation microforms including rolls, microfiche, aperture cards, and jacket film. The practice applies to the microfilming of records of federal, state, local, and other public agencies. It is compatible with government regulations for the microfilming of permanently valuable records and may be used by private industry to comply with public record requirements.

Back to Top Back to Top